In the headphones pansonik is not very loud but I can easily compare only with Asus there of course better in the columns of the difference is not noticed.
по звуку норм, хоть и не выдающийся, а вот вторая ревизия мамки не такая удачная как первая, но первую уже не купить но что есть то есть.
Not a masterpiece, but not a bottom))
The temperature is not reliable measure the pyrometer, in fact there are no more degrees than 50.
125 and nothing is done by the sensor removes rest from space.
The best thing is to measure the temperature with a digital thermometer
The temperature on the motherboard is not the one with the device. This motherboard has no temperature chip installed so the values that appear are incorrect.
Adjustable 4 pin right at the top
3pin × 2 4pin × 2
4 but 1 only adjustable
Yea
I ordered on March 27th, came April 9th and the cooler ring was
Any CPU socket 2011 version 1 and 2.
Will become at least
The motherboard supports any DDR3 memory. ECC Reg and regular. Be sure to look at the CPU
Server works normally
Ram on the mamka works any ESS Reg and usual. Here it all depends on the Pu-yours does not support ESS reg
Should not
Yes, easy
Easy! Socket 2011
Yes, the main thing is the length of the board and the case to look at, according to the height of the norms
Yes, it will.
M2 NVMe third day testing lower slot all running download speed for 2 seconds and all. It is heated up to 56 this with a radiator.
Installed M2 nvhe in the lower slot all works M2 Sata on the upper slot itself did not try to pay attention to the location micro-switches
First green, then black. Outline from left to right (left lead right slave)
Yes
Yes, it\'s compatible.
Maybe somewhere damaged the track on the board, but bios is powered by the duty power supply BP, I measured the voltage if I correctly understood
Yes, it works, with MoD BIOS was able to disperse 4 bars to 2133
I have rev2.3
240mm x 245mm
96
Took a couple of months ago about 8000. Yes, math
Only Sata m2, about the Wi-Fi module unfortunately does not know
Yes, but the power has to be adequate to TDP processor and video.
Yes, bought a and working perfectly with this processor E5 2650 V2. ..
Yes, work
Wipe the contacts on the processor. Get the jumper off the BeOS.
MATX suitable
Will do.
Is working
Works since January. But you shouldn\'t take hokhlopidar.
No, socket 2011 on window 11 does not get through
😱, Try cleaning the Pcie x4 contacts well. I have 2 motherboards and they work perfectly😔🤷
What\'s the stupid question? On this fee, you still do not put a hot processor if you do not want to ruin the fee! And on cold processors will fit and a box cooler is normal. With TDP no more than 95 Watts
Depending on the graphics card and processor
Not in my case, but if I \'ve noticed that USB 3.0 have trouble recognizing certain devices, so I wouldn\'t recommend it if that\'s why you buy it.
No, and I wouldn\'t recommend it until I officially dated all your drivers.
No, everything works at home.
Is no
E5 1650v2 no problem
Yes.
Configure SATA/M2 operating mode in board instructions see
Normally vlasite
Mode of Operation SATA/NVMe, everything is on the Internet
2650 V2 works
The version from the seller find out, the Rev.2 fee is not very much for overclocking if that. BIOS sewing without programmer and experience I do not advise.
Yes, but it will not work out much, Rev.2 slightly cut on food
The last time was C602 from the seller to clarify it is worth it, I liked the last option of Rev.2 the board less, there were dancing with a tambourine with nvdisk on
Yes, I have e5 1620 v2 and it goes perfect
Yea
Yes, supports
It\'s normal only the bios should be stitched
Green one
Yes, they install 10Ku and all the other draivers are pulled up themselves.
Is no
Without a processor and a video card does not eat at all)))
To 1866
Without firmware 1866
USB Terminators work normally and about the reliability of the board itself ask in 5 years.
Through Aida looked, then do not pay attention. The sensor does not show correctly
Maybe. To 1866
Yes suitable
No.
Everything works lower slot and pay attention to microswitches.
Try changing components
Yes, but don\'t take 1650 under overclocking and viduhu is not very hot
